RFS Welding Services
Welding is a process of forming a permanent link by melting its edges and adding filler material. This process is ideal for joining metal parts. RFS offers custom sheet metal welding services. Depending on the material and requirements, we can handle different types of welding, such as MIG, TIG, and spot welding. Our weld seams are neat, smooth, and strong, with no additional spatter. We can adjust the welding method according to the customer’s drawings to optimize the use of the welded parts. We also have extensive welding experience on many large frames, equipment casings, and bases. Our welding factory can handle low-volume special custom and high-volume production orders.
Get a QuoteTypes of Welding Services RFS Provides
MIG welding is our most common welding method. This type of welding can be used for both thin and thick metal plates. The MIG welding process is faster and cleaner than other welding methods. It saves production time, so it is ideal for high-volume production orders.
TIG welding is good for projects that require a nice, clean surface or thin material. Our TIG welding allows us to control the weld precisely, so we can weld fine or small parts perfectly, and although it is slower than MIG, it produces a stronger and cleaner weld.
Spot welding is used for projects that require fast joining of overlapping metal sheets at a specific point.RFS has used spot welding for projects such as enclosures and frames. Spot welding is faster and more efficient than other welding methods. In addition, spot welding leaves fewer weld marks and cleaner seams.
RFS uses laser welding when faced with projects with tight tolerances, thin materials, or complex shapes. Laser welding has a small heat-affected zone and a narrow weld seam. So, it is ideal for use in areas like medical devices and electronics where appearance and precision are important.
Each welding method has its own advantageous characteristics, and RFS selects the most suitable welding method based on the material and customer requirements.
1. For large and complex structures
Welding is an excellent method since some large parts with complex shapes are difficult to complete with a single piece. RFS uses welding for large, complex frames, brackets, machine bases, etc.
2. Strong connections with no loosening problems
Bolts and rivets may loosen under strong vibrations or high loads. In addition, bolts and rivets are also prone to loosening over time. However, RFS welded parts have very strong welded seams that allow the parts to work properly without being affected by vibration or time.
3. Saving assembly time
RFS welded parts do not need to be assembled on-site, as is the case with fragmented parts, so assembly time is saved.
4. Cleaner appearance
RFS welded parts have no excessive holes or bolts and are smoothly connected. The appearance is cleaner than bolted connections and suitable for equipment covers, cases, and frames.
5. Customized sizes and shapes
RFS can weld plates of different thicknesses and shapes together. We offer a customized service to customize the welding of different sizes and shapes.
Get a QuoteAdvantages of RFS Sheet Metal Welding Parts
Selection of Welding Manufacturing Raw Materials
Materials commonly used in sheet metal welding include carbon steel, stainless steel, aluminum, galvanized steel, copper, and other alloy materials. Each material varies in thickness, composition, and surface condition, and its weldability can differ depending on the welding method and filler material. RFS carefully selects the most suitable welding technique based on the characteristics of the material and the customer’s specific requirements. Even the same metal may yield different results with different welding methods. If you have designated welding materials or methods, we also offer customized welding services to meet your needs.
Get a QuoteMetal Welding Fabrication Applications
RFS’s welding services are applicable to many different industries, for example:
- We can provide custom welding of brackets and sheet metal parts for the automotive industry.
- In construction projects, we can provide structural steel welding and connecting parts.
- We can provide welding services for different mechanical parts and enclosures for the agricultural industry.
In addition to these industries, many more have not been mentioned. We can provide precise custom welding services according to the specific requirements of different projects in different industries.
Get a Quote
FAQs
RFS can use MIG, TIG, spot, and laser welding. We will choose the most suitable welding method according to material, size, thickness, etc. If you don’t know which welding method is the best, you can send us the drawing, and our technical engineers will recommend the most suitable welding method for your project.
We have an ISO 9001 quality management system certificate and follow ISO 9001 quality standards for quality inspection of parts. In addition to visual inspection, we can also perform non-destructive testing if necessary.
It is certainly available. RFS can offer powder coating, galvanizing, anodizing, and painting finishes after welding. Different surface treatments also have different effects. We can specify the surface treatment according to your requirements. Suppose you only know the effect you want but are unsure of the difference between the surface treatments. In that case, we also have professional engineers who will advise you on the appropriate surface treatment for your project.
The maximum weld size that RFS can handle needs to be determined by the material and structure of the part. We have undertaken many welding projects for large frames and brackets, so there is no need to worry about our welding capabilities. If you have a specific large-size welding project, you can send us a drawing of the project, and our team will discuss it carefully to determine if it can be welded.
Yes, RFS can deliver. Not only can we perform sheet metal fabrication welding at our facility, but we can also perform machining services. Many of the sheet metal parts we produce also often include multiple machining services, which helps our customers control the overall quality of the part and save time and cost. All you need to do is send us your drawings, and whether it’s just welding or welding followed by drilling or milling, etc., we can do it all.